Instructions for use of led flashing drinking cup series

1. Material:
mainly material is PS ( Polystyrene ), Melting point is about 166℃
secondary material is PP ( Polypropylene ), Melting point is about 160℃
secondary material is PE ( Polypropylene ), Melting point is about 105-125℃

The material is safe, environmentally friendly and non-toxic, and can pass CE, ROHS, FDA, BPA FREE and other tests

2. Electronic circuit boards :
Built-in circuit board to control the lighting mode

3. Led light lighting mode: the most common ones :

on/off switch：

3.1 : Three modes: running flash / flash / all on ( fast blinking / slow blinking / steady ) ;
3.2 : One modes: steady (no any change) ;

water sensor switch : ( lighting when liquid filled )
3.2 : One modes: steady (no any change) ;
3.3 : One modes: auto-blinking ;

4. led color: red/blue/green/yellow/white

on/off switch :
it can be 1pcs=red/blue/green/yellow/white ; ( about 1% use)
it can be 3pcs=1red+1green+1blue ; ( about 30% use )
it can be 6pcs= 2red+2green+2blue ; ( about 60% use )

water sensor switch :
it can be 1pcs=red/blue/green/yellow/white ; ( about 1% use )
it can be 3pcs=1red+1green+1blue ; ( about 10% use )
it can be 5pcs= 2red+2green+2blue ; ( about 80% use )

5. Battery series，about 99% style can replace ;

on/off switch use 3XAG13 / LR44 ;
water sensor switch use 2XCR2025 ;

6. Use With Caution ;
Detach the bottom part before washing;
hand wash only ，Do not dishwasher, Do not microwave ;